Showing results for 
Search instead for 
Did you mean: 

Cycles with Referenced Generic Motion

Siemens Experimenter Siemens Experimenter
Siemens Experimenter



Cycles with Referenced Generic Motion



Easily create cycle-based Generic Motion operations that can be templatized for reuse.


(view in My Videos)


(If you have problems with the embedded player, you can download the attached .mp4 file.)


Do you have a question about this topic?

Post your questions or comments at the bottom of this Tech Tip. (You must be signed in to access this feature.)


About the Author

BillStorrs.png Bill Storrs is in the CAM Product Management Group at Siemens PLM software, Cypress California. His main focus is on CAM usability and learning support. He currently leads the CAM Learning Initiative Team whose mission is to provide users with a comprehensive collection of reference and training materials. He has an M.A. in Corporate Training and Development and has been in the industry for over 20 years.



Valued Contributor
Valued Contributor

When this is output we would want to move to save position clear, safe position, call the Probe Macro  and safe retract.  Many of the moves on the screen we do not want output.   They are needed on the screen to simulate the machine motion.   


What has to be done in the postprocessor to get the correct output?