Showing results for 
Search instead for 
Did you mean: 

Drilling Interrupted Holes Motion Output

Siemens Experimenter Siemens Experimenter
Siemens Experimenter

Drilling Interrupted Holes Motion Output



The Motion Output user interface has been simplified by eliminating the Interrupted Moves option.




Created with NX CAM 10.0.2



This enhancement simplifies the user interface by by eliminating the unnecessary Interrupted Moves option and consolidating the Interrupted and Interrupted with chip breakage cycles under the Single Moves motion output.


To use this self-demo, save the attached part file locally and follow the instructions in the pdf document.


Do you have a question?

Post your questions or comments at the bottom of this Tech Tip. (You must be signed in to access this feature.)


About the Author

Holder.jpg Bill Storrs is in the CAM Product Management Group at Siemens PLM software, Cypress California. His main focus is on CAM usability and learning support. He currently leads the CAM Learning Initiative Team whose mission is to provide users with a comprehensive collection of reference and training materials. He has an M.A. in Corporate Training and Development and has been in the industry for over 20 years.