Showing results for 
Search instead for 
Do you mean 

Drive Curve Creation in Streamline

by Siemens Experimenter Siemens Experimenter on ‎05-02-2017 09:02 AM

Drive Curve Creation in Streamline



You can now create flow and cross curves to improve surface finish.

 image 1.gif



Created with NX CAM 11.0.1



You can now easily create flow curves and cross curves to improve surface finish in Streamline operations by specifying the number of curves in each direction.





(If you have problems with the embedded player, you can download the attached .mp4 file.)



Save the attached part file locally and follow the instructions in the .pdf document.


Do you have a question about this topic?

Post your questions or comments at the bottom of this Tech Tip. (You must be signed in to access this feature.)


About the Author

BillStorrs.png Bill Storrs is in the CAM Product Management Group at Siemens PLM software, Cypress California. His main focus is on CAM usability and learning support. He currently leads the CAM Learning Initiative Team whose mission is to provide users with a comprehensive collection of reference and training materials. He has an M.A. in Corporate Training and Development and has been in the industry for over 20 years.
LIVE Tech Tip Webinars
Watch NX experts demonstrate manufacturing best practices. Stay online for Q&A.