Showing results for 
Search instead for 
Did you mean: 

Drive at faster feed rates with less machine stress using high speed connecting moves

Siemens Experimenter Siemens Experimenter
Siemens Experimenter


This enhancement allows you to create smooth transitions for stepovers in Surface Contouring and Flowcut operations using fewer controls. 


Smooth non cutting moves in contouring and flowcut.gif


Created with NX CAM 9



Learn how to create smooth transitions in Surface Contouring and Flowcut operations.


To use this self-demo, save the attached part file locally and follow the instructions in the pdf document.


Do you have a question?

Post your questions or comments at the bottom of this Tech Tip. (You must be signed in to access this feature.)


About the Author

Holder.jpg Bill Storrs is in the CAM Product Management Group at Siemens PLM software, Cypress California. His main focus is on CAM usability and learning support. He currently leads the CAM Learning Initiative Team whose mission is to provide users with a comprehensive collection of reference and training materials. He has an M.A. in Corporate Training and Development and has been in the industry for over 20 years.
Valued Contributor
Valued Contributor

Quite liked this post. Thank you, I discovered it at just the right time!

LIVE Tech Tip Webinars
Watch NX experts demonstrate manufacturing best practices. Stay online for Q&A.