Cancel
Showing results for 
Search instead for 
Did you mean: 

Easily Organize and Select Your Workpiece Features

Siemens Experimenter Siemens Experimenter
Siemens Experimenter

New Feature Group dialog box

 

Overview

The new Feature Group dialog box is now consistent with the current HOLE_BOSS_GEOM geometry group dialog box.

.

 

new_feature_group_dialog_box.prt

 

Created with NX CAM 9.0.3

 

Details

The new Feature Group dialog box replaces the old Workpiece dialog box. Like the HOLE_BOSS_GEOM geometry group dialog box, you can:

  • Use the list to manually sequence features
  • Optimize features
  • Reverse vector direction

 

To use this self-demo, save the attached part file locally and follow the instructions in the pdf document.

 

Do you have a question?

Post your questions or comments at the bottom of this Tech Tip. (You must be signed in to access this feature.)

 

About the Author

Holder.jpg Bill Storrs is in the CAM Product Management Group at Siemens PLM software, Cypress California. His main focus is on CAM usability and learning support. He currently leads the CAM Learning Initiative Team whose mission is to provide users with a comprehensive collection of reference and training materials. He has an M.A. in Corporate Training and Development and has been in the industry for over 20 years.
Comments
Theorist
Theorist

谢谢分享Smiley Very Happy

Contributors
LIVE Tech Tip Webinars
Watch NX experts demonstrate manufacturing best practices. Stay online for Q&A.