Showing results for 
Search instead for 
Did you mean: 

Edit Mirrored Operations

Siemens Experimenter Siemens Experimenter
Siemens Experimenter



Edit Mirrored Operations

NX CAM 12.0.1


You can now edit the path settings that determine the machining intent of mirrored operations.






(view in My Videos)


(If you have problems with the embedded player, you can download the attached .mp4 file.)



Do you have a question about this topic?

Post your questions or comments at the bottom of this Tech Tip. (You must be signed in to access this feature.)


About the Author

BillStorrs.png Bill Storrs is in the CAM Product Management Group at Siemens PLM software, Cypress California. His main focus is on CAM usability and learning support. He currently leads the CAM Learning Initiative Team whose mission is to provide users with a comprehensive collection of reference and training materials. He has an M.A. in Corporate Training and Development and has been in the industry for over 20 years.



Can you make it make new opration folders?


Hello, I have NX 12.0.1. Mirroring operations works almost perfect, except CAVITY MILL. Allways I try to make mirror of some CAVITY MILL operation it doesn´t work. If I check Generate Tool Path, than tool paths stay on nonmirrored part. Have you ever had similliar problem? Thank you. 

PS: Sorry for my english, I´m not native speaker.