cancel
Showing results for 
Search instead for 
Did you mean: 

Fine Tune Your Boss Milling With a New Operation Type

Siemens Experimenter Siemens Experimenter
Siemens Experimenter

Boss Milling and Threading are new operation types

 

Overview

Hole Milling and Thread Milling have been divided in operation subtypes that machine holes only and bosses only. The existing operation subtypes (Hole Milling and Thread Milling) now machine holes only. The new operation subtypes (Boss Milling and Boss Thread Milling) machine bosses only.

 Image2.gif

 

Created with NX CAM 9.0.1

 

Details

Using new operation subtypes to machine bosses.

 

To use this self-demo, save the attached part files locally and follow the instructions in the pdf document.

 

Do you have a question?

Post your questions or comments at the bottom of this Tech Tip. (You must be signed in to access this feature.)

 

 

About the Author

Holder.jpg Bill Storrs is in the CAM Product Management Group at Siemens PLM software, Cypress California. His main focus is on CAM usability and learning support. He currently leads the CAM Learning Initiative Team whose mission is to provide users with a comprehensive collection of reference and training materials. He has an M.A. in Corporate Training and Development and has been in the industry for over 20 years.

 

LIVE Tech Tip Webinars
Watch NX experts demonstrate manufacturing best practices. Stay online for Q&A.