Generate Non Cutting Moves Only for Any Drive Method
Smart Regenerate is now available for all surface contour drive methods.
Created with NX CAM 11.0.1
You can now regenerate only non-cutting moves when only non-cutting move parameters have changed for any Surface Contouring Drive Method. Previously, this could only be done for Fixed Axis Surface Contouring operations that used the Area Milling Drive Method.
(If you have problems with the embedded player, you can download the attached .mp4 file.)
Save the attached part file locally and follow the instructions in the .pdf document.
Do you have a question about this topic?
Post your questions or comments at the bottom of this Tech Tip. (You must be signed in to access this feature.)
About the Author
Bill Storrs is in the CAM Product Management Group at Siemens PLM software, Cypress California. His main focus is on CAM usability and learning support. He currently leads the CAM Learning Initiative Team whose mission is to provide users with a comprehensive collection of reference and training materials. He has an M.A. in Corporate Training and Development and has been in the industry for over 20 years.