This enhancement makes Gouge Checking for Hole Milling, Hole Chamfer Milling, Boss Milling, and Radial Groove Milling operations consistent with the other Hole Making operation types.
Created with NX CAM 11.0.0
For Boss Drilling and Radial Groove Milling operations, Gouge Checking must be customized into the operation dialog box.
Save the attached part file locally and follow the instructions in the .pdf document.
Do you have a question about this topic?
Post your questions or comments at the bottom of this Tech Tip. (You must be signed in to access this feature.)
About the Author
Bill Storrs is in the CAM Product Management Group at Siemens PLM software, Cypress California. His main focus is on CAM usability and learning support. He currently leads the CAM Learning Initiative Team whose mission is to provide users with a comprehensive collection of reference and training materials. He has an M.A. in Corporate Training and Development and has been in the industry for over 20 years.