Cancel
Showing results for 
Search instead for 
Did you mean: 

IPW-3D Holder Collision Check

Siemens Experimenter Siemens Experimenter
Siemens Experimenter

IPW-3D Holder Collision Check

NX CAM 11.0.2

Overview

The enhanced IPW allows collision checking of tools in turning. The tools are no longer checked  for collisions only in the turning plane.

 

Image2.gif 

Video

 

(view in My Videos)

 

(If you have problems with the embedded player, you can download the attached .mp4 file.)

 

 

Do you have a question about this topic?

Post your questions or comments at the bottom of this Tech Tip. (You must be signed in to access this feature.)

 

About the Author

BillStorrs.png Bill Storrs is in the CAM Product Management Group at Siemens PLM software, Cypress California. His main focus is on CAM usability and learning support. He currently leads the CAM Learning Initiative Team whose mission is to provide users with a comprehensive collection of reference and training materials. He has an M.A. in Corporate Training and Development and has been in the industry for over 20 years.

 

Comments
Pioneer
Pioneer

Hi Bill,

                 At what palce do you place the Main MCS (MCS of the Machine) for this particular ISV. I tried som epart with this ISV. But could not place MCS correctly, so got bad result. Can you please guide?

Contributors
LIVE Tech Tip Webinars
Watch NX experts demonstrate manufacturing best practices. Stay online for Q&A.