Showing results for 
Search instead for 
Did you mean: 

Learn What's New in NX 10 CAM for Die and Mold Machining

Community Manager Community Manager
Community Manager


NX 10 CAM includes several updates for die and mold machining. See what's new for 3 axis surface milling and other related functions.


This video is currently being processed. Please try again in a few minutes.
(view in My Videos)


Created with NX 10



Learn what's new in NX 10 for die and mold machining:

    • Tool path containment and boundaries
    • Cut Region Management
    • Roughing tool path pattern optimization
    • Smoothing Z-level corners
    • Smoothing non-cutting moves
    • Tool path editing


Do you have a question?

Click 'Add a Comment' below to ask it. (You must be signed in to access this feature.)


About the Presenter


Larry Moran85x100.jpg Larry Moran is a Product Manager in the Manufacturing Engineering Solutions group at Siemens PLM. He currently is responsible for the Milling applications in NX CAM for the Die and Mold industry. He has previously been involved as a NC Programmer in the Tool and Die industry. Larry began using Unigraphics in 1981, and joined Siemens PLM in 1989.
Derek Hart
... if we're not having fun, we're not doing it right!
Solution Partner Experimenter Solution Partner Experimenter
Solution Partner Experimenter

Hi Moran,

Can we generate the shop floor sheet for job with the following required info ? We have to compete the other CAM softwares in our region. 


1. Minimum tool length

2. MCS location

3.Other info which are needed for the shop floor



satish kumar