Using new Boring Bar and Chamfer Boring Bar tools in Drilling and Countersinking operations.
Created with NX CAM 11.0.1
You can now create Boring Bar tools for Drilling operations and Chamfer Boring Bar tools for Countersinking operations. These new tools types contain the necessary parameters required to define shapes for boring and chamfering holes.
(If you have problems with the embedded player, you can download the attached .mp4 file.)
Save the attached part file locally and follow the instructions in the .pdf document.
Do you have a question about this topic?
Post your questions or comments at the bottom of this Tech Tip. (You must be signed in to access this feature.)
About the Author
Bill Storrs is in the CAM Product Management Group at Siemens PLM software, Cypress California. His main focus is on CAM usability and learning support. He currently leads the CAM Learning Initiative Team whose mission is to provide users with a comprehensive collection of reference and training materials. He has an M.A. in Corporate Training and Development and has been in the industry for over 20 years.