Cancel
Showing results for 
Search instead for 
Did you mean: 

Optimize Roughing for Best Cutting Performance

Siemens Experimenter Siemens Experimenter
Siemens Experimenter

Automatic Follow Periphery pattern direction optimizes your roughing for the best cutting performance

 

Overview

The new Automatic pattern direction alternates between Inward and Outward per cut level and cut region condition for Follow Periphery cut patterns in Cavity Mill operations. It utilizes open sides and predrilled holes whenever possible to access the cut levels and avoid ramping when possible.

 

Image1.gif

 

Created with NX CAM 9.0.2

 

Details

Optimizing follow perpihery cut patterns for maximum effeciency.

 

To use this self-demo, save the attached part files locally and follow the instructions in the pdf document.

 

Do you have a question?

Post your questions or comments at the bottom of this Tech Tip. (You must be signed in to access this feature.)

 

About the Author

 

Holder.jpg Bill Storrs is in the CAM Product Management Group at Siemens PLM software, Cypress California. His main focus is on CAM usability and learning support. He currently leads the CAM Learning Initiative Team whose mission is to provide users with a comprehensive collection of reference and training materials. He has an M.A. in Corporate Training and Development and has been in the industry for over 20 years.

 

LIVE Tech Tip Webinars
Watch NX experts demonstrate manufacturing best practices. Stay online for Q&A.