Use the Cut Region controls to organize your rest machining regions for Flowcut Reference Tool operations and improve cutting
The Cut Regions dialog box replaces the Manual Assembly dialog box for Flowcut Single, Flowcut Multiple, and Flowcut Reference Tool operations. This new dialog box is easier to use and more consistent with current NX user interface design.
Created with NX CAM 9.0.2
Managing Cut Regions in Flowcut Reference Tool Operations.
To use this self-demo, save the attached part files locally and follow the instructions in the pdf document.
Do you have a question?
Post your questions or comments at the bottom of this Tech Tip. (You must be signed in to access this feature.)
About the Author
Bill Storrs is in the CAM Product Management Group at Siemens PLM software, Cypress California. His main focus is on CAM usability and learning support. He currently leads the CAM Learning Initiative Team whose mission is to provide users with a comprehensive collection of reference and training materials. He has an M.A. in Corporate Training and Development and has been in the industry for over 20 years.