Cancel
Showing results for 
Search instead for 
Did you mean: 

Organize Your Valley Rest Milling Cuts For Improved Performance

Siemens Experimenter Siemens Experimenter
Siemens Experimenter

Use the Cut Region controls to organize your rest machining regions for ordinary Flowcut operations and improve cutting

 

Overview

A new Cut Regions dialog box replaces the Manual Assembly dialog box for Flowcut Single and Flowcut Multiple operations (it is not yet available for Flowcut Reference Tool operations). This new dialog box is easier to use and more consistent with current NX user interface design.

 

Image2.gif

 

Created with NX CAM 9.0.1

 

Details

Using the new Cut Regions dialog box to reorder, divide, and delete.

 

To use this self-demo, save the attached part files locally and follow the instructions in the pdf document.

 

Do you have a question?

Post your questions or comments at the bottom of this Tech Tip. (You must be signed in to access this feature.)

 

About the Author

Holder.jpg Bill Storrs is in the CAM Product Management Group at Siemens PLM software, Cypress California. His main focus is on CAM usability and learning support. He currently leads the CAM Learning Initiative Team whose mission is to provide users with a comprehensive collection of reference and training materials. He has an M.A. in Corporate Training and Development and has been in the industry for over 20 years.

 

LIVE Tech Tip Webinars
Watch NX experts demonstrate manufacturing best practices. Stay online for Q&A.