Cancel
Showing results for 
Search instead for 
Did you mean: 

Orient Work View to Tool Axis or MCS

Siemens Experimenter Siemens Experimenter
Siemens Experimenter

Orient Work View to Tool Axis or MCS

NX CAM 11.0.2

Overview

You can now set the work view based on the tool axis or MCS associated with an operation.

 

image2.gif 

Video

 

(view in My Videos)

 

(If you have problems with the embedded player, you can download the attached .mp4 file.)

 

Self-Demo

Save the attached part file locally and follow the instructions in the .pdf document.

 

Do you have a question about this topic?

Post your questions or comments at the bottom of this Tech Tip. (You must be signed in to access this feature.)

 

About the Author

BillStorrs.png Bill Storrs is in the CAM Product Management Group at Siemens PLM software, Cypress California. His main focus is on CAM usability and learning support. He currently leads the CAM Learning Initiative Team whose mission is to provide users with a comprehensive collection of reference and training materials. He has an M.A. in Corporate Training and Development and has been in the industry for over 20 years.

 

Comments
Gears Phenom Gears Phenom
Gears Phenom

This is a great option.  I only wish it worked for transformed operations.  I submitted an ir  #8985215 

Solution Partner Phenom Solution Partner Phenom
Solution Partner Phenom

Great option. But I use it in NX8.5, NX9, NX10, I start Toolpath Verification and Set View Orientation by Planar Face of tool. 

Of course - some time view have wrong orientation, you can rotate it Ctrl-R. SetView.png

 

 

 

 

Contributors
LIVE Tech Tip Webinars
Watch NX experts demonstrate manufacturing best practices. Stay online for Q&A.