Cancel
Showing results for 
Search instead for 
Did you mean: 

Relief area machining for large stamping dies using T-cutter tools

Siemens Experimenter Siemens Experimenter
Siemens Experimenter

Overview

You can now cut the bottom side of a ledge with the top side of a T-cutter using the Fixed Contour Boundary Drive Method.

 

Machining with a T-Cutter.gif

 

Created with NX CAM 9

 

Details

Learn how to cut the underside of ledges using the fixed contour boundary drive method.

 

To use this self-demo, save the attached part file locally and follow the instructionsin the pdf document.

 

Do you have a question?

Post your questions or comments at the bottom of this Tech Tip. (You must be signed in to access this feature.)

 

About the Author

Holder.jpg Bill Storrs is in the CAM Product Management Group at Siemens PLM software, Cypress California. His main focus is on CAM usability and learning support. He currently leads the CAM Learning Initiative Team whose mission is to provide users with a comprehensive collection of reference and training materials. He has an M.A. in Corporate Training and Development and has been in the industry for over 20 years.

 

LIVE Tech Tip Webinars
Watch NX experts demonstrate manufacturing best practices. Stay online for Q&A.