Showing results for 
Search instead for 
Did you mean: 

Robotic Pick and Place Programming

Siemens Experimenter Siemens Experimenter
Siemens Experimenter


Robotic Pick and Place Programming

NX CAM 12.0


You can now create robotic programs to pick and place objects. This enhancement uses existing generic motion capabilities to change tools and palletize parts and can be used with machining programs to allow you to service the machine tool and perform functions such as polishing, linishing, and deburring.






(view in My Videos)

(If you have problems with the embedded player, you can download the attached .mp4 file.)



Do you have a question about this topic?

Post your questions or comments at the bottom of this Tech Tip. (You must be signed in to access this feature.)


About the Author

BillStorrs.png Bill Storrs is in the CAM Product Management Group at Siemens PLM software, Cypress California. His main focus is on CAM usability and learning support. He currently leads the CAM Learning Initiative Team whose mission is to provide users with a comprehensive collection of reference and training materials. He has an M.A. in Corporate Training and Development and has been in the industry for over 20 years.



Can you show us how to build the robot machine to adjust the movement, and how to modify the post pocessor? thanks