Cancel
Showing results for 
Search instead for 
Did you mean: 

Safer ZLevel cutting with new engage and retract moves

Siemens Experimenter Siemens Experimenter
Siemens Experimenter

Overview

This enhancement adds the capability in fixed axis Zlevel operations to engage and retract with an arc using a ramp angle. It is useful to prevent plunging into the floor IPW at lower cut levels.

 

Safer engage and retract moves for ZLevel operations.gif

 

Created with NX CAM 9

 

Details

Learn how to engage and retract with an arc using ramp angle.

 

To use this self-demo, save the attached part file locally and follow the instructions in the pdf document.

 

Do you have a question?

Post your questions or comments at the bottom of this Tech Tip. (You must be signed in to access this feature.)

 

About the Author

Holder.jpg Bill Storrs is in the CAM Product Management Group at Siemens PLM software, Cypress California. His main focus is on CAM usability and learning support. He currently leads the CAM Learning Initiative Team whose mission is to provide users with a comprehensive collection of reference and training materials. He has an M.A. in Corporate Training and Development and has been in the industry for over 20 years.

 

Comments
Theorist
Theorist

Nice Help........

LIVE Tech Tip Webinars
Watch NX experts demonstrate manufacturing best practices. Stay online for Q&A.