Cancel
Showing results for 
Search instead for 
Did you mean: 

Show 3D or Spinning 3D IPW

Siemens Experimenter Siemens Experimenter
Siemens Experimenter

Show 3D or Spinning 3D IPW

 

Overview

Show the 3D IPW or spinning 3D IPW independent of operation type. 

 Image2.gif

 

 

Created with NX CAM 11.0.1

 

Details

You can now display the 3D IPW or the spinning 3D IPW independent of the operation type. Previously, the system determined the IPW display based on last operation type in the simulation.

 

Video

 

(view in My Videos)

 

(If you have problems with the embedded player, you can download the attached .mp4 file.)

 

Self-Demo

Save the attached part file locally and follow the instructions in the .pdf document.

 

Do you have a question about this topic?

Post your questions or comments at the bottom of this Tech Tip. (You must be signed in to access this feature.)

 

About the Author

BillStorrs.png Bill Storrs is in the CAM Product Management Group at Siemens PLM software, Cypress California. His main focus is on CAM usability and learning support. He currently leads the CAM Learning Initiative Team whose mission is to provide users with a comprehensive collection of reference and training materials. He has an M.A. in Corporate Training and Development and has been in the industry for over 20 years.
Contributors
LIVE Tech Tip Webinars
Watch NX experts demonstrate manufacturing best practices. Stay online for Q&A.