Cancel
Showing results for 
Search instead for 
Did you mean: 

Simple programming for linear grooves using a T-cutter tool

Siemens Experimenter Siemens Experimenter
Siemens Experimenter

Overview

This enhancement provides a new operation designed to cut a single linear groove with a t-cutter while controling material removal from the in-process feature volume.

 

T-Cutter Slot Operation.gif

 

Created with NX CAM 9

 

Details

Learn how to use the new T-cutter Slot operation.

 

To use this self-demo, save the attached part files locally and follow the instructions in the pdf document.

 

Do you have a question?

Post your questions or comments at the bottom of this Tech Tip. (You must be signed in to access this feature.)

 

About the Author

Holder.jpg Bill Storrs is in the CAM Product Management Group at Siemens PLM software, Cypress California. His main focus is on CAM usability and learning support. He currently leads the CAM Learning Initiative Team whose mission is to provide users with a comprehensive collection of reference and training materials. He has an M.A. in Corporate Training and Development and has been in the industry for over 20 years.
Comments
Siemens Pioneer Siemens Pioneer
Siemens Pioneer

Can you really only do planar faces?

LIVE Tech Tip Webinars
Watch NX experts demonstrate manufacturing best practices. Stay online for Q&A.