Showing results for 
Search instead for 
Did you mean: 

Smooth Cutting in Corners Except the Last Pass

Siemens Experimenter Siemens Experimenter
Siemens Experimenter


Smooth Cutting in Corners Except the Last Pass

NX CAM 12.0


You can now smooth corners for all but the last cutting pass in Planar and Cavity Milling operations. This allows you to smoothly and efficiently machine the volume while minimize the un-machined material left in the corners by the last pass.






(view in My Videos)


 (If you have problems with the embedded player, you can download the attached .mp4 file.)



Save the attached part file locally and follow the instructions in the .pdf document.


Do you have a question about this topic?

Post your questions or comments at the bottom of this Tech Tip. (You must be signed in to access this feature.)


About the Author

BillStorrs.png Bill Storrs is in the CAM Product Management Group at Siemens PLM software, Cypress California. His main focus is on CAM usability and learning support. He currently leads the CAM Learning Initiative Team whose mission is to provide users with a comprehensive collection of reference and training materials. He has an M.A. in Corporate Training and Development and has been in the industry for over 20 years.