Smooth NCM transitions for Planar Mill, Cavity Mill, and Hole Making operations.
Created with NX CAM 11.0.1
You can now create smooth transitions between approach/engage moves, retract/departure moves, along transfer moves, and at the end of ramp and helical closed engages for planar mill, cavity mill, and hole making operations. Smooth transitions reduce the wear on the machine tool and prevent dwell marks on the final surface finish.
(If you have problems with the embedded player, you can download the attached .mp4 file.)
Save the attached part file locally and follow the instructions in the .pdf document.
Do you have a question about this topic?
Post your questions or comments at the bottom of this Tech Tip. (You must be signed in to access this feature.)
About the Author
Bill Storrs is in the CAM Product Management Group at Siemens PLM software, Cypress California. His main focus is on CAM usability and learning support. He currently leads the CAM Learning Initiative Team whose mission is to provide users with a comprehensive collection of reference and training materials. He has an M.A. in Corporate Training and Development and has been in the industry for over 20 years.