Cancel
Showing results for 
Search instead for 
Did you mean: 

Trim and Extend Edges in Guiding Curve

Siemens Experimenter Siemens Experimenter
Siemens Experimenter

 

Trim and Extend Edges in Guiding Curve

NX CAM (released June 2019)

In Variable Axis Guiding Curve operations, you can now easily avoid tool contact on adjacent faces.

 

Trim_and_Extend_Edges_in_Guiding_Curve.gif

 

(view in My Videos)

 

(If you have problems with the embedded player, you can download the attached .mp4 file.)

 

About the Author

BillStorrs.png Bill Storrs is in the CAM Product Management Group at Siemens PLM software, Cypress California. His main focus is on CAM usability and learning support. He currently leads the CAM Learning Initiative Team whose mission is to provide users with a comprehensive collection of reference and training materials. He has an M.A. in Corporate Training and Development and has been in the industry for over 20 years.

 

 

Comments
Visionary
Visionary

Hi, in with version i find this enhancement?? I mean build.

 

Thank you.