Showing results for 
Search instead for 
Did you mean: 

Use more tool types for Multi Blade (Turbomachinery) Milling

Siemens Experimenter Siemens Experimenter
Siemens Experimenter


Multi Blade Rough operations can now use ball, spherical, flat, and bull nose tools. Hub Finish, Blade Finish, and Blend Finish operations can now use ball and spherical tools. Previously, only ball tools were supported.


Multi Blade Milling.gif


Created with NX CAM 9



Learn how to use ball, spherical, flat, and bullnose tools for multi blade milling.


To use this self-demo, save the attached part files locally and follow the instructions in the pdf document.


Do you have a question?

Post your questions or comments at the bottom of this Tech Tip. (You must be signed in to access this feature.)


About the Author

Holder.jpg Bill Storrs is in the CAM Product Management Group at Siemens PLM software, Cypress California. His main focus is on CAM usability and learning support. He currently leads the CAM Learning Initiative Team whose mission is to provide users with a comprehensive collection of reference and training materials. He has an M.A. in Corporate Training and Development and has been in the industry for over 20 years.


LIVE Tech Tip Webinars
Watch NX experts demonstrate manufacturing best practices. Stay online for Q&A.