Showing results for 
Search instead for 
Did you mean: 

Verify Tool Path in Fewer Steps

Siemens Experimenter Siemens Experimenter
Siemens Experimenter

Tool Path Verification and Analysis Consolidation



Tool Path Visualization dialog box has been simplified by consolidating options to reduce redundant functionality and provide a clearer, more consistent workflow.





Created with NX CAM 9.0.3



The2D Dynamic tab and the Faceted Solid options have been removed. These options can be made visible through Customer Defaults


To use this self-demo, save the attached part file locally and follow the instructions in the pdf document.


Do you have a question?

Post your questions or comments at the bottom of this Tech Tip. (You must be signed in to access this feature.)


About the Author

Holder.jpg Bill Storrs is in the CAM Product Management Group at Siemens PLM software, Cypress California. His main focus is on CAM usability and learning support. He currently leads the CAM Learning Initiative Team whose mission is to provide users with a comprehensive collection of reference and training materials. He has an M.A. in Corporate Training and Development and has been in the industry for over 20 years.
Valued Contributor
Valued Contributor

I am using nx 11 but while verification through 3d dynamic ,nx oftenly shows an error of internal memory access violation. I always set IPW as course but got unwanted result. Have you any idea how i can speed up this toolpath verification process?????