Cancel
Showing results for 
Search instead for 
Did you mean: 

Wire EDM 4 Axis Synchronized Output

Siemens Experimenter Siemens Experimenter
Siemens Experimenter

 

 

Wire EDM 4 Axis Synchronized Output

NX CAM 12.0.2

Overview

The new Synchronized option for Motion Output Type improves Wire EDM cut quality by outputting smoother, more continuous 4-Axis tool paths.cam12034 Wire EDM 4 Axis Synchronized Output.gif 

 

Video

 

(view in My Videos)

 

(If you have problems with the embedded player, you can download the attached .mp4 file.)

  

About the Author

BillStorrs.png Bill Storrs is in the CAM Product Management Group at Siemens PLM software, Cypress California. His main focus is on CAM usability and learning support. He currently leads the CAM Learning Initiative Team whose mission is to provide users with a comprehensive collection of reference and training materials. He has an M.A. in Corporate Training and Development and has been in the industry for over 20 years.

 

Comments
Experimenter
Experimenter

Hi, when i generated using sychronized with 0.15 radius, the toolpath doesn't look correct. Do you have any ideas?