Cancel
Showing results for 
Search instead for 
Did you mean: 

Manufacturing planning with a digital twin

Siemens Dreamer Siemens Dreamer
Siemens Dreamer

Watch the Digital Enterprise Factory Showcase Tour video blog series to experience the power of digitalization in manufacturing.  During the multi-stop tour, experts demonstrate the planning process for a Field PG assembly.  In our story, a change is necessary in the Field PG design and therefore a change must be made in the process.  In video blog #5, “Manufacturing planning with a digital twin,” experts verify the manufacturing planning process change.   You will learn about the importance of a digital twin in manufacturing planning, and the key capabilities of Siemens Teamcenter Manufacturing, Process Simulate, Easy Plan, and Plant Simulation software.

 

Box Build Planning

A digital twin of an assembly line helps you identify issues much earlier.

 

Siemens Teamcenter Manufacturing

  • Increase manufacturing planning efficiency by leveraging common database for engineering and manufacturing.
  • Prepare process plans for new production introduction
  • Identify the impact of design changes in box build lines.

Watch the video to learn about Teamcenter Manufacturing.

 

(view in My Videos)
 

 

Process Validation

A digital twin helps you visualize and analyze entire assembly operations.

 

Siemens Teamcenter Manufacturing & Process Simulate

  • Manage checklists for a typical product or plant
  • Ensure assembly processes adhere to best practices
  • Visual analysis helps in discussing issues upfront
  • Dashboard helps management to know the program status

Watch the video to learn more about Teamcenter Manufacturing and Process Simulate.

 

(view in My Videos)

 

Shop Floor Planning

Manage plant specific process plans with ease.

 

Easy Plan

  • Reduced shop floor planning mistakes by having access to right information
  • Workflow based functionality leads reduced ramp up time for users
  • Plant specific operations are managed in central location leading to knowledge capture and reuse
  • Improve quality adherence by updating plant specific work instructions

Watch the video to learn about Easy Plan.

 

 

(view in My Videos)

 

Throughput & Utilization

Plan your CAPEX properly. Keep you OPEX under control and utilize your plant to capacity. 

 

Siemens Plant Simulation

  • Plant your capital investments, predict your operating expenses confidently
  • Maximize utilization of your production investment, deliver required output
  • Cut your per part costs by optimizing your production
  • Use your production digital twin for clear, visual communication, and for performing virtual commissioning.

 

Watch the video to learn more about Plant Simulation software.

 

 

(view in My Videos)
 

View the other video blogs in the series:

 

Printed circuit board designs optimized for manufacturing

Electronics design enhanced by collaboration between teams

Integrated design & simulation for optimizing design solutions 

Introduction to the Digital Enterprise Factory Showcase  

 

 This blog is authored by Zvi Feuer, Nilesh Wani, and Noam Ribon of Siemens PLM Software.