Re: Painted / Masked MBD models

Enthusiast
Enthusiast

The only way currently is to divide face or extract a face and trim. Neither are acceptable solutions and Siemens needs to provide better tools to address this gap. Please fill out a GTAC ticket and tell them you want an Enhancement to address this need. The more folks that ring the GTAC bell, the more likely this gets on a list and will get worked.

We've raised this issue in recent TRBs at the company I work for. The requirements are obvious, and the PMI team need only look as far as traditional 2D drawings to understand how the current PMI tools need work to fulfill this definition using 3D definition.

 

Regards, Les