Cancel
Showing results for 
Search instead for 
Did you mean: 

Who Me Too'd this topic

[Hole Making] Tool Drive Point

Solution Partner Innovator Solution Partner Innovator
Solution Partner Innovator

Hi

 

I have a question on the Drill Depth setting.

The depth of the hole is 50mm.

I want to cutting only 40mm on the basis of Tool Tip.

I changed the Depth value to 40 with User defined.

 

hole_depth.jpg

 

However, the Depth value appears as a tool SHOULDER criterion.

 

Is there a way to solve it?

Who Me Too'd this topic